跳到正文
ECA GMP News·AI 评分56

ECA 分析纯蒸汽电导率升高的原因与排查方向

Reasons for increased Conductivity in Pure Steam

AI 导读

ECA GMP News 分析纯蒸汽冷凝水电导率与 TOC 升高的原因,归纳为技术缺陷、进水化学影响、系统真空和检测方法差异四类。换热器或取样冷却器泄漏可让加热蒸汽或冷却水进入纯侧,进水中的腐殖酸等高温分解可生成导电的低分子化合物。

正文 · 原文

The quality of pure steam is assessed based on its condensate, which must meet the requirements for Water for Injection (WFI). Since pure steam is generated via phase transition, it is generally of very high purity. However, elevated values for conductivity or TOC (Total Organic Carbon) may occasionally be observed. Several factors may be responsible:1. Technical Defects Defective heat exchanger: A failure in the heat exchanger of the pure steam generator may allow heating steam to leak into the pure side. Leak in the sample cooler: A crack or leak may lead to cooling water entering the condensate. Countermeasure: Eliminate the technical defect.2. Chemical Influences from Feed Water Volatile organic substances (e.g. humic acids) present in the feed water may decompose at high temperatures, forming low-molecular, conductive compounds. Countermeasure: Optimize feed water treatment or apply thermal degassing of the feed water. 3. Vacuum Formation in the System If the system is shut down, for example over the weekend, a vacuum may form. In this case, gaseous or liquid contaminants can be drawn into the system via condensate or drain lines. Upon restart, it may take days or even weeks to fully flush out residues that have adhered to internal surfaces. Solution: Prevent vacuum formation-for example, by actively ventilating the cooling system with filtered, oil-free compressed air.4. Influence of the Test MethodWhen conductivity and TOC are measured online, at-line, and in the laboratory, significant differences in results are to be expected. The values can vary substantially depending on the measurement setup. For example: Online: 0.2 µS/cm At-line: approx. 0.4 µS/cm Laboratory: up to 0.8 µS/cmReason: Exposure to air during sampling allows CO? uptake, which leads to the formation of carbonic acid and hydrogen carbonates, both of which are conductive.

来源:ECA GMP News · gmp-compliance.org