FDA发布注射剂和生物制品允许过量体积及标签瓶装量最终指南（FDA-2014-D-0248）
Allowable Excess Volume and Labeled Vial Fill Size in Injectable Drug and Biological Products
FDA发布注射剂和生物制品允许过量体积与标签瓶装量最终指南，取代2014年3月14日发布的同名草案。指南说明注射剂瓶允许过量体积的监管要求，并指出何时需要为拟定的过量体积提供论证。同时建议标签瓶装量应适合药品的预期用途和给药方案。
该最终指南取代2014年同名草案，明确注射剂瓶允许过量体积及标签瓶装量相关的监管要求和建议。
GUIDANCE DOCUMENT
Final
- Docket Number:
- FDA-2014-D-0248
- Issued by:
-
Guidance Issuing Office
Center for Drug Evaluation and Research
Center for Biologics Evaluation and Research
This guidance provides the pharmaceutical industry with the Center for Drug Evaluation and Research’s (CDER’s) and the Center for Biologics Evaluation and Research’s (CBER’s) current thinking on allowable excess volume and labeled vial fill size in injectable drug and biological products. It replaces the draft of the same name that was published on March 14, 2014 (79 FR 14517). Specifically, the guidance clarifies the FDA regulatory requirements and recommendations pertaining to allowable excess volume in injectable vials and describes when justification is needed for a proposed excess volume in these injectable drug products. This guidance also discusses the importance of appropriate fill volumes for injectable drug products and recommends that labeled vial fill sizes be appropriate for the intended use and dosing of the drug product.
Submit Comments
You can submit online or written comments on any guidance at any time (see 21 CFR 10.115(g)(5))
If unable to submit comments online, please mail written comments to:
Dockets Management
Food and Drug Administration
5630 Fishers Lane, Rm 1061
Rockville, MD 20852
All written comments should be identified with this document's docket number: FDA-2014-D-0248.
来源：FDA Pharmaceutical Quality Documents · fda.gov