FDA 发布溶出度仪 1 和 2 机械校准 CGMP 最终指南

The Use of Mechanical Calibration of Dissolution Apparatus 1 and 2—Current Good Manufacturing Practice (CGMP)

AI 导读

FDA 发布最终指南，帮助药品生产商及辅助检测实验室按机械校准公差校准 USP 溶出度仪 1 和 2。指南建议增强型机械校准程序可作为 USP 通则溶出度中现行仪器适用性程序的替代方案。文件编号 FDA-2007-D-0420，并建议控制溶解气体、振动和溶出杯尺寸等溶出度试验中的显著变异来源。

推荐理由

指南提出可用增强型机械校准程序替代 USP 溶出度仪适用性程序，并列出需控制的变异来源，便于实验室对照现有做法。

正文 · 原文

GUIDANCE DOCUMENT

Final

Docket Number:

FDA-2007-D-0420

Issued by:

Guidance Issuing Office

Center for Drug Evaluation and Research

This guidance is intended to aid drug manufacturers (including ancillary testing laboratories) in calibrating U. S. Pharmacopeia (USP) Dissolution Apparatus 1 and 2 to help assure that critical parameters associated with the dissolution apparatus meet certain mechanical calibration (MC) tolerances. This guidance recommends that an enhanced MC procedure (such as the one recommended in this guidance) can be used as an alternative to the current Apparatus Suitability procedure for Dissolution Apparatus 1 and 2 described in USP General Chapter Dissolution. Regardless of whether the enhanced MC procedure or Apparatus Suitability procedure is used, the guidance also recommends that appropriate measures be taken to control the following sources of significant variability in dissolution testing: dissolved gases, vibration, and vessel dimensions.

Submit Comments

You can submit online or written comments on any guidance at any time (see 21 CFR 10.115(g)(5))

If unable to submit comments online, please mail written comments to:

Dockets Management
Food and Drug Administration
5630 Fishers Lane, Rm 1061
Rockville, MD 20852

All written comments should be identified with this document's docket number: FDA-2007-D-0420.