FDA药品质量抽样与检测(DQST)人用药品合规计划指南7356.008(2015年9月11日修订版)
Drug Quality Sampling and Testing (DQST)—Human Drugs (7356.008)
美国FDA于2015年9月11日修订合规计划指南7356.008《药品质量抽样与检测(DQST)——人用药品》,更新了实施日期、完成日期及组织与程序变更和项目联系人。该计划通过FACTS数据库下达抽样任务,覆盖成品剂型、辅料及原料药(API),并规定不合格结果须立即上报OPQ/OQS/DQSA/QDAB。
PDF 文字版;图形和原始排版请参阅官方 PDF。
第 1 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
CHAPTER 56 - DRUG QUALITY ASSURANCE
SUBJECT: IMPLEMENTATION DATE
DRUG QUALITY SAMPLING AND TESTING (DQST)- 09/11/2015
HUMAN DRUGS
Revision Note: Program revised 09/11/2015 to update implementation
date, completion date, organizational/procedural changes and program
contacts. COMPLETION DATE
DATA REPORTING
PRODUCT CODES PROGRAM ASSIGNMENT CODES
Industry codes: 56008A - CDER-Initiated (Domestic samples)
50, 54-56, 60-66
56008L - CDER-Initiated (Domestic-Import
samples)
56008H – Import Labeling Examinations
FIELD REPORTING REQUIREMENTS
A. DRUG QUALITY SAMPLING AND TESTING (DQST) COORDINATORS
1. Each district and laboratory assigns Drug Quality Sampling and Testing (DQST)
Coordinators to monitor the sampling and analysis under this program. The DQST program
is commonly referred to as the “Survey Program”. When the DQST assignments or “survey
assignments” are issued to the field districts, there are “survey numbers” associated with
specific product names or a category of products.
2. The Program Manager in CDER’s Office of Pharmaceutical Quality (OPQ), Office of
QualitySurveillance (OQS), Division of Quality Surveillance Assessment (DQSA), Quality
Deviation Assessment Branch (QDAB), interfaces with the DQST Coordinators via the Field
Accomplishment and Compliance Tracking System (FACTS) database. The Program
Manager issues DQST “survey” assignments in FACTS, then monitors and provides updated
status reports of survey sample collections and testing to the DQST Coordinators via
electronic mail on a monthly basis. The DQST Coordinators, investigators, and laboratory
personnel use FACTS to report both their sample collections and specific testing results. For
tracking purposes, it is important that the DQST Coordinators use the assigned FACTS
Work Request Identification Numbers associated with specific drug products (designated
with unique survey numbers) in order to capture their sample collection and analyses
information. Each drug product is assigned a unique survey number (or one survey number
pertains to a group of drug products sharing common characteristics) reflecting the fiscal year
followed by a number (e.g. 2016-001) and a FACTS
TRANSMITTAL NO 09/11/2015 Cover Sheet - PAGE 1 of 3
FORM FDA 2438g
第 2 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
Identification Number is associated with the survey number. Survey numbers are associated
with all finished dosage forms, excipients, or active pharmaceutical ingredients (API)s.
3. If samples are unavailable for collection (i.e., the firm no longer manufactures the product or
the manufacturing firm has moved from the assigned district), the assigned district should
return the assignment to OPQ/OQS/DQSA/QDAB utilizing the "return assignment" in
FACTS and should provide a list of products available for collection. Each “returned”
assignment should include the reason for the return, and if known, the name and address of
the new location where samples are available. The assigned district should alert the
OPQ/OQS/DQSA/QDAB Program Manager via electronic mail to
surveyreport@cder.fda.gov so that the Program Manager can re-assign the sample collection
to the appropriate district in FACTS [or select a different product for collection].
B. VIOLATIVE SAMPLES (OUT-OF-SPECIFICATION) RESULTS
Immediately notify the OPQ/OQS/DQSA/QDAB Program Manager by e-mail to
surveyreport@cder.fda.gov, the Office of Regulatory Science (ORS) in the Office of Operations
(OO), and the home district of the manufacturer of any out-of-specification sample results. Send
the original worksheets to the home district for follow-up, along with a copy of the summary
worksheet to the attention of the QDAB Program Manager. CDER’s OC may be the home
district in certain circumstances. Please check the collection report to identify the appropriate
home district.
C. ANALYTICAL RESULTS AND FINDINGS
1. Accurately enter into FACTS all specific analytical results and testing methodology used. In
addition to providing the specific analytical results for each test performed, please provide
the basic pass/fail results in the “Laboratory Conclusion” field under “Sample Summary”.
Also, the following Laboratory Classifications (LC) are to be provided in the Laboratory
Report:
LC 1: In Compliance
LC 2: Regulatory Action Not Needed
LC 3: Adverse Findings
LC 4: No Classification Needed
LC 5: Sample Not Analyzed or Reviewed
2. The OPQ/OQS/DQSA/QDAB Program Manager prepares a summary report of the products
sampled and tested for each fiscal year and the DQST Coordinators review the status update
information. The summary report includes the number of samples collected and tested for
each drug product; the Online Reporting Analysis Decision Support System (ORADSS)
accomplishment data for the Program Activity Code (PAC) 56008A (for domestic sampling
and testing activities), PAC 56008L (for domestic-import sampling and testing activities),
and PAC 56008H (for import labeling examinations); a brief description of out-of-
specification sample results along with reported findings of the follow-up conducted by the
TRANSMITTAL NO 09/11/2015 Cover Sheet - PAGE 2 of 3
FORM FDA 2438g
第 3 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
home district. More detailed summary reports are being developed and, upon
implementation, will be posted at the following URL:
http://inside.fda.gov:9003/CDER/OfficeofPharmaceuticalQuality/OfficeofSurveillance/ucm43
8182.htm
These new summary reports will reflect data extracted directly from FACTS relative to the
sample collection reports and laboratory reports.
TRANSMITTAL NO 09/11/2015 Cover Sheet - PAGE 3 of 3
FORM FDA 2438g
第 4 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
PART I – BACKGROUND
The goal of the Drug Quality and Sampling Testing (DQST) compliance program is to protect the public
health by means of sampling and testing domestic and international (domestic-import) drug products in
order to minimize exposure to non-compliant and/or poor quality drugs. This is accomplished by means
of targeting products (finished dosage forms, APIs, and excipients) for sampling based on risk-based
selection criteria and a risk-based model, and then conducting drug quality testing in an effort to monitor
and assure the quality of the nation’s drug supply. This program, in combination with other quality
assurance compliance programs, is an integral part of the Agency’s overall post marketing surveillance
strategy.
In previous years, survey samples were mainly collected directly from manufacturers, distributors, and
wholesalers, and were primarily prescription drugs subject to approved Abbreviated or New Drug
applications (A/NDAs). Due to the globalization of pharmaceutical products increasing consumer risk,
the types of domestic and international products have expanded under this program to include:
- prescription and over-the-counter (OTC) drugs, excipients, and APIs manufactured or repacked
by domestic and international (domestic-import) manufacturers;
- drug products available at pharmacy retailers (including compounded drugs);
- drug products that have approved NDAs or ANDAs;
- unapproved drug products;
- APIs considered at risk for Economically Motivated Adulteration (EMA);
- APIs and excipients considered at risk for melamine and melamine analog adulteration;
- OTC drug products at risk for Diethylene Glycol Adulteration (DEG); and
- Vitamin APIs considered at risk for adulteration
In keeping with QDAB’s effort to strengthen the DQST program, the following strategies are being
developed for implementation to enhance the effectiveness of the program:
- refining the existing product selection criteria as well as developing a risk-based model for
targeting firms and products with quality issues;
- expanding the techniques for sampling (e.g. sampling at import entry docks) and broadening the
scope of testing;
- developing more detailed summary reports of survey findings; and
- improving the timeliness and completeness of sample collection and testing; and
- collaborating and sharing information between Federal Agencies.
TRANSMITTAL NO 09/11/2015 Section I - PAGE 1 of 1
FORM FDA 2438g
第 5 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
PART II – IMPLEMENTATION
A. OBJECTIVES
- To protect the public health through the sampling and testing of domestic and international
products to minimize exposure to non-compliant and poor quality drugs;
- To obtain information about the quality of the nation's drug supply by directing coverage of
drug products, firms, and countries that are perceived to pose the greatest public health
significance risks and to conduct the necessary compliance follow-up for out-of-specification
samples.
B. PROGRAM MANAGEMENT INSTRUCTIONS
The Drug Quality Sampling and Testing (DQST) compliance program (CP) is an integral part of
FDA's postmarket drug product surveillance activities. All sampling and testing activities should
be reported under PAC 56008A (for domestic samples), PAC 56008L (for domestic-import
samples). Also, use PAC 56008H for import label examinations.
CP 7356.008 complements other compliance programs - Drug Manufacturing Inspections
(7356.002), the Active Pharmaceutical Ingredients (7356.002F), Unapproved New Drugs
(Marketed, Human, Prescription Drugs only) (7352.002), and other assignments, such as the
Pharmacy Compounding Assignments (PAC 56D015). Use PAC 56002 when conducting drug
process inspections for follow-up to out-of-specification (violative) “survey” samples, but use
PAC 56008A (for domestic samples) and PAC 56008L (for domestic-import samples) for any
investigations related to DQST “survey” products.
Under certain circumstances, CDER may develop study protocols or provide more detailed
instructions for sample collections and analyses that supplement this CP. These instructions will
be appropriately cleared through the Office of Regulatory Affairs (ORA). Also refer to the
instructions in the Investigations Operations Manual (IOM) and ORA’s Laboratory Manual.
Some sample analyses will require method development and validation (e.g., for some
unapproved and compounded drug products). Time used for development of methods, and the
validation of those methods, for testing samples under this program should be reported under
PAC 56008A (for domestic samples) and PAC 56008L (for domestic-import samples).
TRANSMITTAL NO 09/11/2015 Section II - PAGE 1 of 1
FORM FDA 2438g
第 6 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
PART III – INSPECTIONAL
A. GENERAL
This program covers both domestic and international (domestic-import) finished dosage forms,
excipients, and APIs. Samples include commercially manufactured or compounded drugs
available to consumers through various outlets including wholesalers, distributors, and retail
pharmacies.
CDER’s QDAB Program Manager issues a DQST assignment in FACTS at the beginning of
each fiscal year and as new information of potentially poor quality drug products (finished
dosage forms, APIs or excipients) becomes available, additional assignments will also be issued
during the same fiscal year. The total number samples for collection and testing for all the
assignments issued during the fiscal year is contingent upon the number of resources allocated in
the ORA Workplan for the DQST program.
B. INSPECTIONS
PAC 56008A is used for the resources dealing with sampling and testing of domestic samples
and PAC 56008L is used for the resources dealing with sampling and testing of domestic-import
samples under this program. PAC 56008A does not include resources for inspection; rather use
PAC 56002, Drug Manufacturing Inspections, for inspection resources. Use the appropriate CPs
when performing follow-up inspections. Please copy the QDAB Program Manager on all
follow-up inspections. Also, please use PAC 56008H for import labeling examinations.
C. SAMPLE SELECTION
In March/April, the Program Manager in QDAB solicits drug survey candidate
recommendations from CDER and ORA headquarters and FDA district offices based on their
intelligence and reported consumer complaints. The risk-based selection criteria list is provided
for their reference. Recommendations may include finished products, excipients, and/or APIs.
The QDAB Program Manager provides the list of drug survey candidates to an established
committee called the DQST Working Group (WG). The DQST WG consists of representatives
from OC, the Office of Generic Drugs, the Office of New Drug Quality Assurance, and Office
of Regulatory Science (ORS). The primary function of the WG is to evaluate and select which
recommended products to survey relative to risk-based selection criteria. The goal is to target
those products posing the greatest potential public health risk in terms of quality. In addition to
using the traditional reference to risk-based criteria, the WG will be using a risk-based
computerized model, which is currently being developed, to better assist in evaluating the risk
factors of drug survey candidates. Furthermore, the DQST WG will explore different kinds of
survey assignments in order to improve the effectiveness of the DQST program. For instance,
the WG may choose to survey products with common characteristics, such as drug products
having similar preparation methods (e.g., compounding; sterile process) or drug products having
a specific use or drug products for targeted populations.
TRANSMITTAL NO 09/11/2015 Section III - PAGE 1 of 7
FORM FDA 2438g
第 7 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
In addition to the solicitation of drug survey candidates, the Program Manager in QDAB will
solicit establishment site recommendations for sampling, based on past history of compliance,
elapsed time since last inspection, or because the firm has been recently added in the official
establishment inventory. Once the establishments have been identified, using a combination of
risk-based criteria and the establishment selection model, the products for collection will be
selected following the same procedure previously described under drug survey candidate
solicitation.
The DQST survey assignment, concurred by the WG and approved by ORA, is issued at the
beginning of the fiscal year. In keeping with resource allocations in the ORA field work plan for
PAC 56008A (for domestic samples) and 56008L (for domestic-import samples), separate
assignments are staggered throughout the fiscal year.
D. SAMPLE COLLECTION
The sampling and testing assignments, issued by QDAB in FACTS, reflect the identified drug
products, survey numbers assigned to the drug products, dosage forms, strengths, manufacturers
and their site addresses, sample sizes, required tests, methodology sources, and sample collection
and testing instructions.
Depending upon the assignment issued, sample collection can be conducted by field
investigators at a manufacturer, distributor, wholesaler, or import dock entry. In some cases,
CDER's OC will collect samples or samples may be ordered directly from contract
pharmacies.
Unless specifically requested in the assignment, do not collect interstate (I/S) documentation.
Do not collect the 702(b) portion for these “survey samples” since they will not be considered
official samples for regulatory purposes. These samples are flagged as per the IOM as “survey
samples”. In rare circumstances, CDER will discuss the feasibility of converting an unofficial
sample to an official sample with the Investigator.
Follow the IOM instructions for sample identification, sample preparation, and collection report
preparation.
As appropriate, districts should request representatives from state boards of pharmacies to
accompany FDA Investigators on sample collections at pharmacies. Contact the Office of
Unapproved Drugs and Labeling Compliance (OUDLC) in Office of Compliance (OC) for
any questions concerning inspections, labeling concerns, or sample collections at pharmacies
with state authorities.
1. Instructions for Collecting Finished Dosage Form Drug Products:
• QDAB will enter the sample collection and analysis assignments into FACTS.
• If the assigned dosage strength is not available for sampling, a different dose strength of
the same product should be collected, if available.
TRANSMITTAL NO 09/11/2015 Section III - PAGE 2 of 7
FORM FDA 2438g
第 8 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
• One lot from each of the identified products is targeted for sampling. A sample should
come entirely from one lot.
• The investigator must check their database sources to determine if the National Drug
Code (NDC) number identified in the assignment is correct; if the NDC number is
incorrect or missing, the investigator collects the assigned product and notifies the Drug
Registration and Listing Team in DCRMS (eDRLS@fda.hhs.gov) with the correct NDC
number.
• If the firm reports that they no longer manufacture the product (s) requested in this
assignment, the investigator should request the firm to check their current drug listing to
ensure that all products are correctly listed with FDA. If the firm finds their listing is
incorrect or out of date, they should update their listing as required by 21 CFR Part 207.
Questions can be addressed to eDRLS@fda.hhs.gov
• If any samples and/or records are not available at the site listed in the assignment and
instead should be collected at a different district, the original district should return the
sample assignment to the QDAB Program Manager in FACTS, stating the correct
sampling site and appropriate district under “Comments” if known. The QDAB
Manager, in turn, will re-assign the sample collection assignment to the appropriate
district in FACTS.
• If any samples and/or records are not available at the site listed in the assignment and no
other site is available for collection, the original district should return the sample
assignment to the QDAB Program Manager in FACTS, listing available drug products in
the sampling site under “Comments”. The QDAB Manager, in turn, will replace the
assignment as needed with a new sample collection request in FACTS.
• If the “Duplicate C/R” function is used when creating collection reports, be sure you
duplicate on top of the blank assigned collection report so as to ensure you do not create
an Ad Hoc assignment.
• If collection reports are inadvertently entered under Ad Hoc assignments, the investigator
should notify QDAB of the Ad Hoc FACTS assignment number to enable QDAB to
accurately monitor all samples collections under the survey.
• If a different lab is listed to perform chemical and microbiological analysis, when
splitting the sample is requested in the assignment, the Investigator should split the
sample and send the appropriate amounts to the identified laboratories based on the
stated sample size guidelines reflected in the assignment. If in doubt, please call the
laboratory as to how much sample is needed for specific testing in analyses. In some
cases, two different laboratories will be assigned to perform chemical and
microbiological analysis, but splitting the sample is not requested so the full appropriate
sample size needs to be directed to each laboratory.
TRANSMITTAL NO 09/11/2015 Section III - PAGE 3 of 7
FORM FDA 2438g
第 9 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
• Collect the firm’s methods, specifications, references (include impurity and active
ingredient reference standards) and degradant standards, and Certificates of Analysis, if
available, and forward a copy to the analyzing laboratory in the Form FDA 525 envelope,
marked “methods”. In the event that the firm’s methods, specifications, references,
degradants, and/or certificates of analysis are not available at the collection site,
immediately inform the analyzing laboratory through an e-mail message.
• When the FACTS collection report is created, the “National Sample Distributor” feature
may, by default, designate a lab different from that specified in this assignment. If this
occurs, the investigator should use the “Override” feature and input the laboratory
designated in the assignment.
(a) Sample Size:
The sample size guidelines related to chemistry testing for finished dosage forms
and APIs are reflected under “Suggested Sample Size (Chem)” in the assignment.
Refer to the following guidelines for suggested sample size for microbiological
testing for finished dosage form products:
• for all products requiring STERILITY testing, collect 48 units of product .
• for all NON-STERILE products (e.g. ointments, creams, etc.) requiring
microbiology testing for Microbial limits testing (aka microbial enumeration
or testing for specified microorganisms), collect a minimum of 15 units [if the
product container size has 30 grams or more] (5 units for either enumeration
or specified microorganisms testing, 5 units for the suitability testing, 2 for
method development and 3 extra in case of laboratory accident). If the
volume of the individual units is less than 30 grams, then collect enough units
to total 450 grams.
For products targeted for specialized testing (e.g., degradation, impurities), the
sample size may be adjusted by the collecting party to ensure there is sufficient
product to conduct the specific tests. Some samples, such as ophthalmic
ointments, may contain very small amounts of product. The validated regulatory
method (USP, NDA) or the firm's method should indicate sample size needed for
analysis.
Supplemental Sample Size Instructions:
Impurities, degradants and related compounds:
Sufficient to perform the analysis (three times by the applicable method) (NOTE:
check the official or validated regulatory method or the firm’s method as needed
TRANSMITTAL NO 09/11/2015 Section III - PAGE 4 of 7
FORM FDA 2438g
第 10 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
for the required amount.)
NOTE: In the case of a very expensive drug product or standard, the Investigator
should contact the QDAB Manager who will consult with both the DQST WG to
determine how vital the analysis is, and with ORS and/or the laboratory to
determine the minimum amount required to complete the analyses in an effort to
reduce the costs.
Non-compendial reference standards:
Sufficient to perform the analysis (three times by the applicable method) (NOTE:
check the official or validated regulatory method or the firm’s method as needed
for the required amount.)
(b) Methods:
If “dissolution” or “drug release” tests are specified for the sample being
collected, please obtain a copy of the firm’s methods and specifications or use the
compendial methods (USP methodology) for these tests. If USP methods are
appropriate, it is unnecessary to obtain the firm’s analytical methods.
(c) Records:
The following records should be collected, if applicable, for each finished dosage
form sampled:
• Specifications and test methods of analyses used by the firm for each test
referenced in Attachment I, if other than USP method.
• If USP method, please provide the USP reference (edition, supplement, page
number, and title).
• I/S is not required for sample collection. However, I/S is required as part of
the follow-up investigation to any violative samples.
2. Instructions for Collection of APIs:
• The QDAB Manager has entered the sample collection and analysis assignments
into FACTS.
• The firm should collect API samples from the bulk API container to ensure the
integrity of the sample. The investigator should observe the sample collection
conducted by the firm.
• Collect non-USP methods, specifications, reference/impurity standards, and
Certificates of Analysis, if applicable.
TRANSMITTAL NO 09/11/2015 Section III - PAGE 5 of 7
FORM FDA 2438g
第 11 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
• The Investigator should request the firm to collect API samples and references or
impurity standards in opaque, non-reactive containers, such as amber glass bottles.
API samples should not be collected in Whirl–Pak bags or other plastics unless the
firm uses this type of container for storage of the substance. Review the firm’s SOPs
for any precautionary measures that should be observed when handling/sampling. Be
sure to protect light sensitive materials. Either conduct the sampling yourself or
observe the firm while they collect samples. If you choose to collect the samples
yourself, please use safe procedures with clean utensils in a manner so as not to cause
cross contamination.
• API samples should be stored under appropriate storage conditions (e.g.,
temperature).
Description of Firm Data in the Collection Report:
If an API is collected from a finished dosage form manufacturer, the API manufacturer
should be listed as the manufacturer and the finished dosage form manufacturer should be
listed as the dealer.
Collect APIs that have been received by the finished dosage form manufacturer within
the past 36 months. For lots older than 36 months, the Investigator should identify the
firm’s proposed outcome for the lot. The Investigator should notify the SPT Manager
who will then consult with both the DQST WG and ORS whether the lot should be
sampled.
(a) Sample Size:
• Active Ingredients (Chemistry & Microbiological Testing)*
*(These samples are to be collected by the firm, not the Investigator, to
protect the integrity of the sample)
Powder - 50 grams from stock or 10 grams from the firm’s reserve
Liquid - 100 ml from stock or 100 ml from firm’s reserve
• Impurities and related compounds
Sufficient to perform the analysis three times by the applicable method
(NOTE: check the official or validated regulatory method or the firm’s
method as needed for the required amount.)
• Non-compendial reference standards
Sufficient to perform the analysis three times by the applicable method
(NOTE: check the official or validated regulatory method or the firm’s
method as needed for the required amount.)
(b) Records:
TRANSMITTAL NO 09/11/2015 Section III - PAGE 6 of 7
FORM FDA 2438g
第 12 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
The following records should be collected by the Investigator for each API
sampled by the firm:
• Material Safety Data Sheets;
• Certificate of Analysis for each batch sampled;
• Results of any assay, identification and/or impurity tests performed by the
firm on the batches of API sampled (this should include at least one example
chromatogram for each of the assay and impurity tests;
• Specifications and methods of analyses used by the firm for each test
referenced in Attachment I, if other than USP methods, with a copy of their
method validation. If USP method is used, please provide the USP reference
(edition, supplement, page number, and title).
E. REPORTING INSTRUCTIONS:
All sampling activities conducted under this program should be reported under PAC 56008A (for
domestic samples) and under PAC 56008L (for domestic-import samples).
1. FACTS Reporting Instructions
The collecting district offices should not generate Ad Hoc work assignments for this
program but should use the FACTS work assignment identification numbers issued by the
requesting office.
If collection reports are inadvertently entered into FACTS as an Ad Hoc assignment, please
inform the QDAB Program Manager via e-mail to surveyreport@cder.fda.gov, with the Ad
Hoc FACTS work assignment identification number or sample number so that its progress
can be tracked.
Sampling assignments that cannot be completed should be “Returned by Accomplishing
Organization” in FACTS with the reason noted in the “Remarks” section (i.e. firm no
longer makes the product at the assigned location). If an alternate collection site is
discovered, this information should be included under “Remarks”, along with an e-mail to
surveyreport@cder.fda.gov and QDAB will issue new operation (s) in FACTS to the new
district. If the site is within your district, an attempt should be made to collect samples at the
alternate location.
When the FACTS collection report is created, the “National Sample Distributor” feature
may, by default, designate a laboratory different from that one specified in the assignment. If
this occurs, the Investigator should use the “Override” feature and input the laboratory
designated in the assignment.
TRANSMITTAL NO 09/11/2015 Section III - PAGE 7 of 7
FORM FDA 2438g
第 13 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
PART IV – ANALYTICAL
A. SAMPLE ANALYSIS
The assignments specify the methods, tests, and designated laboratories for the drug product.
Please utilize validated regulatory methods (USP and/or A/NDA) or as needed, method
developed and validated by FDA. Guidance for validation of analytical methods can be found in
the ORA Laboratory Manual, Volume II, Section 2, ORA-LAB 5.4.5, Appendix 1 ‘ORA
Validation and Verification Guidance for Human Drug Analytical Methods’.
If specific tests are not listed, the sample should be evaluated using stability-indicating
chromatographic methods or other suitable techniques for assay (including specificity),
identification, physicochemical characteristics, and purity.
When a chromatographic purity method is not specified in the monograph, the chromatographic
purity should be determined using HPLC (i.e. a diode array detector) and/or other suitable
techniques.
No Check Analysis is required for any of the required tests for this assignment. No
analytical worksheet is required for any of the required tests for this assignment with noted
exceptions.
If assay and content uniformity methods are the same, then assay does not need to be
accomplished for the original analysis.
For methods validated by FDA labs, refer to the document in the ORA Laboratory Manual: ORA
Laboratory Manual Volume II, Section 2, ORA-LAB 5.4.5, Appendix 1 ORA ‘Validation and
Verification Guidance for Human Drug Analytical Methods’.
If non-USP tests are run for impurities or degradants, please use suitable techniques (NMR, MS-
MS, etc.) or reference/impurity standards, if available.
If laboratories encounter difficulties or irregularities with a method, an explanation should be
incorporated into the worksheet, with immediate follow-up by telephone or e-mail to both
ORS and QDAB. Any change in the methodology would require a worksheet.
1. Sample Disposition
All Class I, IV and V samples can be authorized for disposition by the home district’s
Compliance Branch following their standard procedures for disposing Class I, IV, and V
samples, or by the laboratory following standard laboratory disposition procedures found in
the LM under Volume III, section 2.9 “Disposition of Samples”. For the domestic-import
(international) samples, contact CDER (e-mail surveyreport@cder.fda.gov) before you issue
TRANSMITTAL NO 09/11/2015 Section IV - PAGE 1 of 2
FORM FDA 2438g
第 14 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
an SDN (Sample Disposition Notice) for these samples as CDER will check with the field
laboratory and CDER’s Division of Pharmaceutical Analysis (DPA) to confirm that their
analysis is complete. Do not SDN Class II and III violative survey samples until the
regulatory cases are closed out and CDER gives permission to SDN the sample.
B. ANALYZING LABORATORIES
1. Field Laboratories:
Each FACTS assignment includes the analytical laboratory identified by ORS.
2. Headquarters Laboratories:
Office of Pharmaceutical Quality, Office of Testing and Research, Division of
Pharmaceutical Analysis, 645 Newstead Ave, St. Louis, MO 63110
Laboratory analysts must report final analytical results into FACTS as soon as analyses are
completed. Specific analytical test results are required.
C. REPORTING INSTRUCTIONS:
All testing activities conducted under this program should be reported under PAC 56008A (for
domestic samples) and under PAC 56008L (for domestic-import samples).
TRANSMITTAL NO 09/11/2015 Section IV - PAGE 2 of 2
FORM FDA 2438g
第 15 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
PART V - REGULATORY/ADMINISTRATIVE STRATEGY
Samples collected under this program are unofficial samples since they are not considered regulatory
samples as reflected in the IOM Section 4.1.4. Do not collect the 702b portion when sampling. Do not
collect I/S documentation at the time of sampling since these are not regulatory samples.
Drug products manufactured by international manufacturers are considered domestic-import samples.
The investigator should follow the IOM, Section 4.1.4.8, to describe these domestic-import samples in
the collection report.
Use appropriate compliance programs for follow-up inspections of out-of-specification (violative)
samples.
For out-of-specification domestic and international samples, the QDAB Program Manager coordinates
follow-up within OPQ, OC/ OUDLC, ORA’s Division of Medical Products and Tobacco Program
Operations (DMPTPO); and the home district, as appropriate. For all out-of- specification samples, the
QDAB Program Manager will issue a follow-up assignment by electronic mail and request the districts
to conduct the necessary follow-up investigations and document/report all corrective actions to the
QDAB Program Manager by electronic mail to surveyreport@cder.fda.gov. If extra sampling is
necessary, the districts are required to report all specific analytical results in FACTS.
TRANSMITTAL NO 09/11/2015 Section V - PAGE 1 of 1
FORM FDA 2438g
第 16 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
PART VI - PROGRAM CONTACTS AND REFERENCE
A. CONTACTS
1. Office of Regulatory Affairs (ORA)/Office of Operations(OO)/Office of Medical
Products and Tobacco Operations (OMPTO)
Division of Medical Products and Tobacco Program Operations
Jim Dunnie
Telephone: (301) 796-5438
• ORA/OO/Office of Enforcement and Import Operations (OEIO)/Division of Import
Operations (DIO)
Questions about general import operation issues should be directed to:
Stella Notzon: 301-796-6678
E-mail: Stella.Notzon@fda.hhs.gov
• ORA/OO/OEIO/Division of Compliance Systems (DCS)/Import Compliance System
Branch (ICSB)
Questions about imports and the sample tracking report should be directed to:
Steven Branch: 301-796-8760
e-mail: Steven.branch@fda.hhs.gov
• ORA/OO/OMPTO/DMPTOP/Medical Products and Tobacco Program Operations
Branch (MPTPOB)
Questions about sampling or investigation procedures should be directed to:
Nadeem Chaudhry: 301-796-9091
E-mail:Nadeem.chaudhry@fda.hhs.gov
• ORA/OO/Office of Regulatory Science
Ian Paul Mayers – General Chemistry
Telephone: (301) 796-6552
Angele Smith – General Microbiology & Sterility
Telephone (301) 796-6133
2. CDER
Office of Pharmaceutical Quality (OPQ), Office of Quality Surveillance (OQS), Division
of Quality Surveillance Assessment, (DQSA), Quality Deviation Assessment Branch
(QDAB)
TRANSMITTAL NO 09/11/2015 Section VI - PAGE 1 of 2
FORM FDA 2438g
第 17 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
QDAB Program Manager: Andrea Schaub
Telephone: (301) 796-3225
E-mail: Surveyreport@cder.fda.gov or CDER SURVEY REPORT
B. REFERENCE
Please see CDER Key Officials link, below, for current contact information for
OPQ/OQS/DQSA/QDAB.
http://www.fda.gov/downloads/aboutfda/centersoffices/officeofmedicalproductsandtobacco/cder/cont
actcder/ucm070722.pdf
TRANSMITTAL NO 09/11/2015 Section VI - PAGE 2 of 2
FORM FDA 2438g
第 18 页
FOOD AND DRUG ADMINISTRATION
COMPLIANCE PROGRAM GUIDANCE MANUAL PROGRAM 7356.008
PART VII – CENTER/ORA HEADQUARTER RESPONSIBILITIES
The Office of Pharmaceutical Quality (OPQ), Office of Quality Surveillance (OQS), Division
of Quality Surveillance Assessment, (DQSA), Quality Deviation Assessment Branch (QDAB) will:
1. solicit drug product recommendations from CDER and ORA headquarters and district offices;
2. solicit drug establishment site recommendations from CDER and ORA headquarters and district
offices;
3. collaborate with the DQST WG in identifying drug products and establishment sites for
collection and testing for the assignment relative to the resources in the field workplan. Employ
the risk survey model to assist in evaluating the risks of the solicited drug products;
4. recommend or specify tests to be performed based on the reason/justification given for sampling;
5. prepare study protocol, if necessary;
6. prepare and issue sampling and testing assignments electronically and via FACTS;
7. if necessary, collect samples, prepare collection reports, and submit samples to laboratories for
analysis;
8. re-assign sample collections in FACTS as appropriate;
9. manage and monitor the status of the sample collections and testing via FACTS; and
10. prepare summary results of samples collected and tested and post the summary reports at the
following URL:
http://inside.fda.gov:9003/CDER/OfficeofPharmaceuticalQuality/OfficeofSurveillance/ucm43
8182.htm
The Office of Regulatory Science (ORS) will:
1. assign the appropriate laboratories, contingent upon their equipment and workload, to the
assigned sampling product;
2. resolve analytical issues in consultation with laboratories and to QDAB; and
3. assure timely completion of analyses.
TRANSMITTAL NO 09/11/2015 Section VII - PAGE 1 of 1
FORM FDA 2438g [final page]
来源:FDA 官方药品与生物制品信息 · fda.gov